Posted: Tue Dec 27, 2005 8:32 am
scusate nella mia webcam ce qualcosa che nn va, giusto?
Se dietro a un router o a un firewall:gsaro wrote:scusate nella mia webcam ce qualcosa che nn va, giusto?
If you are unable to view a webcam in aMSN after a contact has send you an invite, or after you have issued the command to receive/send webcam, and you are behind a router, you may need to follow these steps:
If you receive: IP-Restrict-NAT and you receive false in webcam wizard, that means your connection is firewalled. (does not send the IP)
If this is the case, you will need to open some ports for the webcam to use because they are currently blocked.
To do this, open your router web-based configuration (check router manual for details on this). Once you have the web-based configuration open, browse for a setting called "port forwarding" or "port range forwarding" or something similar to that. (This might be found under the advanced features for your router).
Now that you have the port forwarding page open, you will want to set the port forwarding range so that aMSN will be able to accept and send the webcam stream.
Here's an example of how you will set up your port forwarding:
Application: aMSN
Start: 6890
End: 6900
Protocol: Both(TCP & UDP)
IP: xxx.xxx.x.xxx
Enabled: X (Yes/True)
Note: xxx.xxx.x.xxx is the IP of your machine that you are trying to send / receive webcam
If you have a web server open on your port 80, you can try to disable it too, sometimes it helps.
General port instructions for Apple Airport Base Station or Airport Express (of course, use ports 6891 to 6900 in the configurations)
http://www.blueskyis.com/bittorrent/air ... arding.php
Vi farò sapere
